Zaptec Go charging station incl. installation

• Suitable for all electric and hybrid vehicles equipped with a type 2 socket.
• Expandable and scalable (up to 3 charging stations)
• RDC-DD 6mA residual current circuit breaker in accordance with IEC 62955
• Charging power of the wallbox up to 22 kW
• (as a rule, an 11kW installation is carried out)
• Incl. installation flat rate for single-family homes with max. 2 wall openings and up to 20m surface-mounted installation

With this package, you receive the Zaptec Go Asphalt black charging station including a flat-rate installation service for single-family homes.

The installation package includes the following services:

• Digital HomeCheck, on-site visit if necessary
• Cable/pipe surface-mounted installation up to 20m, 11KW design
• Max. 2 wall openings
• Small material
• Installation of FI type A in power distribution
• Installation and commissioning
• Proof of safety
• Installation and completion notification to the energy supplier

Exclusive: additional small power distribution, special requirements of the energy supplier (e.g. load shedding)

Technical specifications

• Width 180 mm
• Height 242 mm
• Depth 75 mm
• Interfaces

- 4G LTE-M (subscription required)

- WLAN 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)

- HMI, identification and configuration

- Bluetooth Low Energy (BLE 4.1)

- RFID/NFC reader - Milfare Classic, type A

- RGBW LED circuit for device status

- 1.2W power consumption in standby mode

• Protection class

- IP54, indoor and outdoor use

- Impact resistance IK8

- UL94 - 5VB fire classification

- UV-resistant

• CE conformity in accordance with IEC 61851 1:2017 and IEC 62955 and the Radio Equipment Directive 2014/53/EU and the ROHS Directive 2011/65/EU
• Protection class II (4kV alternating current and 6 kV pulse, insulation)
• Overvoltage category III (4kV)
• Color asphalt black
• Charging socket IEC 62196-2 type 2 socket Electronic cable blocking, cable can be permanently blocked by the user
• Charging power

- 22 kW at 32A/3-phase (TN networks)

- 12.7 kW at 32A/3-phase (IT networks)

- 7.4 kW at 32A/1-phase IT/TN

• Wall mounting
• Current 32 A
• Energy meter Yes, integrated 3-phase energy meter

Scope of delivery:

1x Zaptec Go in selected color

1x all-inclusive installation package for single-family homes

Installation information

The installation package offers you a comprehensive standard scope of services to get your charging station up and running conveniently and professionally. Installation usually takes place within 3-4 weeks of receipt of the installation permit. You will be contacted by our installation partner after receipt of your order to discuss the next steps.

The flat rate includes

• Digital HomeCheck (on-site visit if required)
• Cable/pipe surface-mounted installation up to 20 m, designed for 11 kW
• Maximum of two wall openings
• Small material
• Installation of a type A RCD in the power distribution board
• Installation and commissioning
• Proof of safety
• Installation and completion notification to the energy supplier

Additional small power distribution boards or special requirements of the energy supplier (e.g. load shedding) are not included. The installation company will invoice separately for services that go beyond the scope mentioned above